Máy đo ma sát COF của vật liệu dạng tấm như sản phẩm không dệt, khăn giấy, khăn, phim và hàng dệt.

Handle-O-Meter

Measure the combined effects of flexibility and surface friction of sheeted materials including nonwovens, tissue, toweling, film and textiles with the Handle-O-Meter.

• Thwing-Albert's Handle-O-Meter (HOM) measures the combined effects of flexibility and surface friction of sheeted materials including nonwovens, tissue, toweling, film and textiles.
• This test method has proven to correlate well with the actual performance of the material in production processes.
• Two interchangeable beams are available a 100 gram beam and a 1000 gram beam available to meet your needs.

Applicable Industry Standards: ASTM D2923, ASTM D6828-02, TAPPI T498, INDA IST 90.3, NWSP 090.3.R0 (15), ISO 8295, GB 10006, ASTM D1894.

The Handle-O-Meter measures “handle” which is the combined effects of flexibility and surface friction of sheeted material such as nonwovens, tissue, toweling, film and textiles. The data generated has been shown to correlate well with the actual performance of the material in production processes and finished product performance.  This instrument expedites the evaluation of a product by replacing the use of a sensory panel to measure softness or hand feel which can be subjective and time consuming.

Measurements are obtained effortlessly. Simply place the test sample over the slot that extends across the instrument platform and hit test. A penetrator beam pivots on a cam, engages the sample and forces it into the slot. An LVDT, in conjunction with a torsion bar, measures the resistance encountered by the penetrator blade as it moves into the slot. Stiff materials offer greater resistance to the motion of the beam as it moves into the slot. Rough materials also exert resistance as they are dragged over the edge of the slot. The combined resistance is reported on a touch screen display.

Two interchangeable beams are available which provides versatility for testing different materials. Quickly change between a 100 gram and 1000 gram beam. With auto ranging, the Handle-O-Meter immediately detects the beam in use and adjusts the range and resolution accordingly. The slot width is also adjustable to accommodate samples of varying thicknesses.

Test modes can be quickly set for single, double or quadruple measurements. The average is automatically calculated for double or quadruple tests.

Advanced software enables the unit to compute and display qualitative analysis of the test results including averaging, standard deviation and the high & low readings of a series of tests.

Features

• Adjustable slot openings: 5, 10, 20 mm and 1/4 in.
• Interchangeable beams, 100 gram & 1000 gram
• Touch Screen Display
• Statistical Analysis
• USB and Serial Port
• Industry Standards:
• ASTM D2923, D6828-02
• TAPPI T498
• NWSP 090.3.R0 (15)

Options

• Teflon Coated Plates Teflon plates are recomended for use with plastic film to reduce static friction.
• Software Option:
• MAP4 Software provides unlimited testing capabilities with built-in test methods that can be customized by the end user.  This software allows for extensive data analysis to evaluate materials.

The 211-2005 replaces model 211-2000

The post Handle-O-Meter Thwing-Albert | Cung cấp thiết bị Thwing-Albert tại VietNam appeared first on khohangtudonghoa.com.

Phân phối các thiết bị hãng Thwing-albert tại VietNam

Máy kiểm tra hệ số ma sát / bóc ​​tách FP-2260 - FP-2260 Friction/Peel Tester

This Coefficient of Friction Tester (COF) / Peel Tester can measure static and kinetic coefficient of friction as well as run seal strength tests, 180° peel, 90° peel, and T-peel tests.  The FP-2260 also offers a tensile test mode to perform lightweight tensile tests up to 10 kg (22 lbf).    

Its small bench top design makes the FP-2260 light weight allowing it to be used in a laboratory or setup out on the production floor for offline testing as needed. 

Plastic film, paper, paperboard, adhesives, labels and packaging materials are ideally tested with the FP-2260.  

Replaces the FP225-1, FP-2255 and FP-2250

Thwing-Albert's FP-2260 COF Tester (Coefficient of Friction Tester) / Peel Tester provides more information with less keystrokes and offers capability to run the machine in five languages. It also provides the ability to create, save, and password protect test set ups. The COF test mode can be configured to measure the static and kinetic coefficient of friction as well as slide angle. The Peel Tester mode can test the seal strength, and peel properties of plastic film, paper, paperboard, adhesives, corrugated/cardboard, labels and packaging materials. The Peel Tester can be configured to perform 180° peel tests, 90° peel tests, and T-peel tests. The Tensile Tester mode can be configured to perform lightweight tensile tests up to 10 kg (22 lbf).

Features:

• Multifunctional membrane keypad
• Easy to read display (240 pixels x 64 pixels)
• Automatic load cell recognition
• Interchangeable .5kg, 1kg, 2kg, 5kg and 10kg load cells
• Adjustable crosshead and load cell (Vertically and Horizontally)
• Automatic Return of the crosshead
• 14" of Crosshead travel
• Store 128 tests each for COF, Peel and Tensile
• USB and RS-232 Data Communication Port
• Available test area 225mm x 350mm
• Electronic over travel switches
• Selectable force units [g, kg, lbf, oz, N]
• Preset industry standard test method storage
• Ability to save customized test setups

Industry standards:

• ASTM D1894 (COF for Plastics)
• ASTM D4521 (COF for Corrugated/Fiberboard)
• ASTM D2534 (Coefficient of Kinetic Friction for Wax Coatings)
• ASTM D6862 (Standard Test Method for 90 Degree Peel Resistance of Adhesives)
• ASTM D6252 (Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle)
• ASTM D3330 (Peel Adhesion for Pressure Sensitive Tape 180°)
• ASTM D1876 (Standard Test Method for Peel Resistance of Adhesives - T-Peel Test)
• ASTM F88 (Seal Strength for Flexible Barrier Material)
• AFERA: 4001 P11
• FINAT: FTM 1-6, 10, 11
• ISO 8295 (COF for Plastics)
• PSTC: 101 (A, B, C, D, E, F), 4, 15, 55
• TAPPI T816 (COF for Corrugated and Paperboard)
• TAPPI T549 (COF for Uncoated Writing & Printing Paper)
• TLMI: L-IA1, L-IA2, L-IA3

          and more...

The FP-2260 utilizes a multifunctional keypad which allows users to easily navigate through the menu options. The crosshead and the load cell are adjustable to allow ease of use when changing test set ups. The system also offers the ability to test to a specific distance or a specific time. The FP-2260 comes standard with the auto return/stop option at the end of a test.

When selecting a COF tester one FP-2260 advantage is the large front panel display screen. The front display is 240 pixels x 64 pixels and is designed for readability by the operator. The memory capacity on the FP-2260 can store up to 128 individual tests for each mode (COF, Peel, Tensile).

For added versatility the FP-2260 offers optional accessories to add testing options:

• Low capacity tensile - manual and air operated grips for seal and tensile tests
• Standard and Custom COF sleds
• 90°/180° peel fixture
• T-peel fixture
• Tray peel fixture
• Delamination test fixtures
• Heated Platen for testing at elevated temperatures up to 350° F

Software Option:

MAP4 Software provides unlimited testing capabilities with built-in test methods that can be customized by the end user.  This software allows for extensive data analysis to evaluate materials.

The post Máy kiểm tra hệ số ma sát COF tester FP-2260 Thwing-albert appeared first on khohangtudonghoa.com.